Precautions for the use of diamond (PCD)saw blades

Precautions for the use of diamond (PCD)saw blades

1. When installing the saw blade, you must first confirm the performance and use of the machine, and it is best to read the machine manual first. In order to avoid wrong installation, causing an accident.
2. When using the saw blade, the rotational speed of the main shaft of the machine should be confirmed first, and it should not exceed the maximum rotational speed that the saw blade can achieve, otherwise there will be dangers such as cracking.
3. When using, workers must do accidental protection work, such as wearing protective cover, gloves, hard hat, labor insurance shoes, protective glasses, etc.
4. Before installing the saw blade, check whether the main shaft of the machine has runou or large swinging gap. During installation, fasten the saw blade with a flange and a nut. After installation, check whether the center hole of the saw blade is firmly fixed.
It is fixed on the flange of the table. If there is a washer, the washer must be sleeved. After embedding, gently push the saw blade by hand to confirm whether the rotation is eccentric.
5. When installing the saw blade, you must first check whether the saw blade is cracked, distorted, flattened, or missing teeth. If there are any of the above problems, it is strictly prohibited to use it.
6. The teeth of the saw blade are extremely sharp, and it is forbidden to collide and scratch, and must be handled with care. It not only prevents damage to the human body, but also avoids damage to the cutting edge of the cutter head and affects the cutting effect.
7. After installing the saw blade, it must be confirmed whether the center hole of the saw blade is firmly fixed on the flange of the saw table. change Whether the movement is eccentric shaking.
8. The cutting direction indicated by the arrow on the saw blade must be aligned with the rotation direction of the saw table. It is strictly forbidden to install in the opposite direction, as the wrong direction will lead to tooth loss.
9. Pre-rotation time: After replace.